|Exam Name||:||Troubleshooting Cisco Wireless Enterprise Network (WITSHOOT)|
|Questions and Answers||:||104 Q & A|
|Updated On||:||Click to Check Update|
|PDF Download Mirror||:||300-370 Brain Dump|
|Get Full Version||:||Pass4sure 300-370 Full Version|
When designing your wireless network for iOS devices, which two limits of packet loss and jitter ensure stable, quality communication? (Choose two.)
Jitter should be kept to less than 500 ms.
Packet loss should remain under 1 percent.
Packet loss should remain under 5 percent.
Packet loss should remain under 2 percent.
Jitter should be kept to less than 100 ms.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/technology/vowlan/troubleshooting/ vowlan_troubleshoot/8_Site_Survey_RF_Design_Valid.pdf
You are troubleshooting an AP joining issue. You have captured the CAPWAP join request sent from the AP to the controller. Which information do you export?
MAC address of the AP that issues the join request
version of the controller
AP broadcast domain
name of the controller that issues the joining request
An engineer ran the debug packet logging enable all command, but only 25 packets are shown and none from the client the engineer wants to see. Which command helps find data that is specific to the client?
debug packet logging enable rx
debug packet logging acl lwapp-ip
debug packet logging enable format
debug packet logging acl ip
You are debugging a WGB client. Which description of the client is true?
disconnected from the wired device
triggered to reauthenticate
disconnected from the authentication server
triggered to roam
Wireless users encounter choppy VoVLAN on one floor of a building. Which troubleshooting approach will determine the cause of the issue in the least amount of time?
move the problem
shoot from the hip
A post-deployment wireless survey identifies a roaming issue in the main corridor of a hospital. Which action do you take to mitigate the issue?
Enable RSSI Low Check on the WLC
Disable RRM on the WLC
Change the AP channels in the area.
Enable CleanAir on the WLC
In a new deployment, your team has connected many access points in a single switch and you noticed that some access points are not getting power. Which command on a Cisco switch can give you the remaining power (Watts) to confirm if it is a PoE issue?
show power inline
An engineer uses the shutdown and no shutdown commands on a switch port that an access point is connected to because the AP had disassociated. These commands usually resolve the issue. Which troubleshooting methodology does this demonstrate?
divide and conquer
shoot from the hip
Which two EAP types are tunneled? (Choose two.)
You have designed your wireless network for data coverage. However, as 5 GHz device a client’s increase over legacy 2.4 GHz devices, you observe roaming issues and instability of wireless communication for the newest devices. Which element will cause this issue?
You have designed for data coverage, but you need a voice design to accommodate 5 GHz devices.
Band Select is ON and steers clients to connect to 2.4 GHZ over 5 GHz.
RRM is ON and favors 2.4 GHz legacy devices.
5 GHz cell size is smaller than 2.4 GHz cell size, which results in inadequate overlap for 5 GHz clients.