|Exam Name||:||Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)|
|Questions and Answers||:||201 Q & A|
|Updated On||:||Click to Check Update|
|PDF Download Mirror||:||300-135 Brain Dump|
|Get Full Version||:||Pass4sure 300-135 Full Version|
Drag the command from the left onto the corresponding outcome on the right.
Refer to the exhibit. Which hashing method is being used for the enable secret?
Refer to the exhibit. SCP connectivity to a server (IP: 172.16.1.200) is unavailable on Monday evenings at 11:00 PM. Which configuration is the root cause of the issue?
The ACL "time-range" blocks the traffic.
All SCP traffic is denied by ACL deny tcp any any eq 21.
The ACL deny ip any any blocks the traffic.
All SCP traffic is denied by ACL deny tcp any any eq 23.
Using the divide and conquer approach, drag the troubleshooting steps on the left onto the corresponding description on the right.
Refer to the exhibit. A company has implemented Management Plane Protection (MPP). The monitoring team needs to copy the configuration of Router via a CLI encrypted transport. Which interface must the team use?
Refer to the exhibit. BR-PC1 (192.168.100.10) cannot reach the Internet. Access to the internet is routed through the HQ site and all NAT configurations have been applied and verified. The user on BR-PC1 has run a traceroute. Which step is next to diagnose the issue?
Ping the LAN IP address of the HQ-Firewall.
Check the MTU between BR-Rtr1 and HQ-Rtr1.
Run a traceroute to the WAN IP address of HQ-Rtr1.
Make sure the HQ-Rtr1 and HQ-Firewall are within the same VLAN.
Drag the network characteristics of GRE from the left onto the correct network type on the right. Not all characteristics are used.
Refer to the exhibit. User1 is unable to ping User2. An administrator has logged into each switch, starting with SW1 and ending with SW2 and has examined the links between each. Which troubleshooting method has the administrator employed?
Refer to the exhibit. The traceroute fails from R1 to R3. What is the cause of the failure?
Redistribution of connected routes into OSPF is not configured.
An ACL applied inbound on fa0/1 of R3 is dropping the traffic.
An ACL applied inbound on loopback0 of R2 is dropping the traffic.
The loopback on R3 is in a shutdown state.
What will be the result if a user tries to connect to line vty 0 using the usemame
Cisco and password Cisco123 while the TACACS server is unreachable? aaa new-model
aaa authentication login default group tacacs+ local-case line aaa authentication login LOCAL-VTY line
username Cisco password 0 Cisco123
line vty 0 4
login authentication LOCAL-VTY transport input all
The user will be authenticated after the TACACS server fallback timer expires.
The user will not be authenticated because the usemame is incorrect.
The user will not be authenticated because the TACACS server is unreachable.
The user will not be authenticated because the password is incorrect.